The screen exists out of 4 main parts :
1)At
the left hand side you will see the DOG (display of gears) area which can be
modified on a tractor. You can put in the date and time, speed, fuel
consumption ... as wanted.
●
2)In
the middle part you will have your VT application. Compare your monitor on the
tractor with windows and powerpoint. Your tractor software is your windows and
the VT application which runs can be compared wiht powerpoint. This VT
application runs in your tractor software.
●
3)On
the Intelliview III monitor you will see an additional menubar which has 3
buttons. Maybe you saw already that we do not have a home button on the screen
as we had on Intelliview II ?
●
At the right side you will have the menu
buttons as you have on all applications. This is regarding your baler
application but can be changed to the tractor application with one touch. Speak
about that on the next slide.
As already spoken, on intelliview III, we
have an additional toolbar. The goal ? Well, it has 3 buttons :
1)A key
to switch to the next application (or camera function when installed)
2)A key
which can toggle the softkeys between baler application (powerpoint) and
tractor (windows). This is a fast and easy way to switch between runscreen 6
(VT) and e.g. Runscreen 2 (trip computer)
3)A
home key which brings you to the tractor main screen.
ليست هناك تعليقات:
إرسال تعليق