8. Knotter
A.Knotter
drive shaft + protection
•Protected
with shearbolt.
(replace every 2500 bales)
●•Knotters are shaft driven from the
stuffer gearbox
•
•Knotter & driveline protection is
provided by a shearbolt
•Contains
the sensor for PTO rpm control.
•Sensor
receives signal of crowngear inside gearbox (z = 68 ; n = 11/68)
C.
Stack assembly
••Knotters are not painted but treated with
special black anodising for reliable knotter performance from 1st bale onwards.
•Easy accessible through flip-up cover and
removable side shields•
•A sensor (new position) on the guard will
indicate to the operator that the guard is in the open position by displaying a
warning message on the monitor
D.
Twine finger
E.
Knotter brake
•
Large diameter knotter brake disc offers a smoother quieter
cycle, reduced knotter shearbolt breakages and reduced needle damage.
•Function:
- To keep constant load on needles during tying cycle.
- Help to hold needles in fix
position.
- Prevent needles from
overrunning.
•
Spring length 32 mm
F.
Knotter fans
•The knotter fans are activated from the
monitor and will start automatically as soon as the PTO speed exceeds 600 rpm•
•Knotter fans can easily be lifted up and
parked to allow
acces to the twine tensioners and knotters.
Knotter
fan assembly can be lifted and parked for easy access for twine threading at
start off.
G.
Needles
Wider
needle rollers with no gap beside the roller for the twine to get trapped.
ليست هناك تعليقات:
إرسال تعليق