الاثنين، 1 يوليو، 2013

Basic components in big baler part 11 12. Oiling & greasing

12. Oiling & greasing
A.Oiler

An automatic central lubrication distribution system takes oil from the pump and provides a constant regulated oil supply to the drive chains
The fixed displacement system ensures that each chain receives the correct amount of lubrication
Integrated automatic oilier
Doses controlled with an electrical motor commanded by BCM-VT.
Do NOT put motor continuously ON. This will burn out the motor.
B. Grease pump
Centralised greasing is standard
Seven main distribution blocks, 80 grease points.
An optional automatic centralised greasing system is available
The greasing rate can be adjusted on the monitor
The automatic greasing models maintain the manual grease nipples for additional greasing in very dusty conditions or to clear blocked lines
Automatic greasing system = centralised greasing system with pump.
Pressure up to 350 bar.