السبت، 13 يوليو 2013

Monitor in big baler part 2 2. Installation

2. Installation
Customers with a VT tractor only need to connect the baler to their isobus connector at the back of the tractor, switch on the contact and drive.
Customers who do not have a isobus tractor will work as before : They install the tractor harness (which commes with the baler) into their tractor and connect the screen. To install this wire harness, you need to find battery power, ground and a 12V after ignition signal.
The break away connector is placed at the rear of the tractor.